N350 TC357mag rcbs 200fn
-
Richard Pickering
- Class B
- Posts: 308
- Joined: Sun Feb 06, 2011 10:56 am
- IHMSA Member#: 5905
- Location: Stone Mountain, Ga
N350 TC357mag rcbs 200fn
Friends, Have any of you tried N350 in a 10'' 357mag using the rcbs 35-200fn ? My barrel is an early 1983 and has no throat requiring the bullet seated deep. There are barrels with long throats. I have used 4227 at 12gr; acc9 at 10.5gr and 1680 at 12 and 13gr. I have used n350 in a 44mag using the rcbs 240sil bullet at 10 or 10.5gr. I wondered if it is suitable in 357. Thanks
I have served as assistant match director, Southern Silhouette club, 1980s. Also, the Griffin Gun Club for Silhouette during the 1990s, to about 2005. For a short period I authored the ''Cast Bullet'' section of The IHMSA News. Joined IHMSA March 1979.
-
Richard Pickering
- Class B
- Posts: 308
- Joined: Sun Feb 06, 2011 10:56 am
- IHMSA Member#: 5905
- Location: Stone Mountain, Ga
Re: N350 TC357mag rcbs 200fn
V V quotes 6gr to 8gr for a 180gr bullet. I'll try 6gr and see how it performs.
I have served as assistant match director, Southern Silhouette club, 1980s. Also, the Griffin Gun Club for Silhouette during the 1990s, to about 2005. For a short period I authored the ''Cast Bullet'' section of The IHMSA News. Joined IHMSA March 1979.