I recently picked up a 10" Contender barrel in 357 Max. I am currently unable to get Max brass, but have 360DW brass because of another barrel. I am looking for load recommendations for a 190gr FP Hunter Supply (plain base green lube no pc) bullet Midway sells. I have IMR 4227, H110, 2400, A1680, and LilGun for powders and SPM or SR primers to choose from.
My current accuracy 360DW load is a Speer 158gr SP over 19.5gr H110 for my carbine barrel. It is quite the fireball thrower in the 10" Max barrel, but has no pressure indicators. Any suggestions for the 190gr lead bullet?
360 DW loads for 10" Max barrel
-
64XP-100
- Spotter
- Posts: 96
- Joined: Tue Feb 24, 2015 7:27 pm
- IHMSA Member#: 57733
- Location: Eastern PA
- Contact:
Re: 360 DW loads for 10" Max barrel
An old article I found:
http://www.lasc.us/RangingShotDanWesson360Revolver.htm
http://www.lasc.us/RangingShotDanWesson360Revolver.htm
Pat Camus
Eastern PA @ Falls Township or Wilkes-Barre
NRA-Endowment Member
Eastern PA @ Falls Township or Wilkes-Barre
NRA-Endowment Member
-
Redleg11B
- Target Setter
- Posts: 12
- Joined: Tue Mar 19, 2019 12:29 am
- IHMSA Member#: 0
- Location: Central PA
Re: 360 DW loads for 10" Max barrel
I did see that and thought about using the 200gr data over a chronograph to see what it does for me. I also have DW archived data from the forums, but it is only for jacketed bullets.64XP-100 wrote: Sat Jul 03, 2021 6:52 am An old article I found:
http://www.lasc.us/RangingShotDanWesson360Revolver.htm