fa 357 loads

[wheelgun7360]

anybody out there with some load suggestions for a freedom arms 357 load? using starline brass, 200 grain speer fmj silhouette bullets, cci small rifle primers, and got a bunch of accurate #9. was thinking starting around 13 grains. anybody use this combo? allen

[mugs]

This group was shot in my FA with 15.0 grs. H-108 [same as #9] Starline brass Rem. 71/2 Rcbs 180 Sil. Redding profile crimp at 100 yrds. With your 200 grn. bullet 13.0 grns. should be a good start.
Mugs

[mugs]

Allen

If you haven't read it there's a good article at LASC.US. Featured articles by Todd Spotti, part 1 & 2 on loading .357 FA loads.
Mugs

[wheelgun7360]

thanks mugs, i've seen the writeup but had forgotten about it. will check it out. allen