Blast shield needed

NO COMMERCIAL VENDORS!
Post Reply
User avatar United States of America
Rodent
Class B
Posts: 303
Joined: Sat Feb 05, 2011 9:03 am
IHMSA Member#: 27115
Location: Madison, Virginia

Blast shield needed

Post by Rodent »

Dang it. I sold mine to Brian. I knew I should not have done that.
So....now I am in need of another. Does anyone have one that is collecting dust?



Mike
Co-Match Director - Piedmont Sportsman Club in Gordonsville Virginia
Top
United States of America
xp-100
Class B
Posts: 272
Joined: Tue Mar 01, 2011 8:07 pm
IHMSA Member#: 57405
Location: North Central Alabama

Re: Blast shield needed

Post by xp-100 »

Mike, go down to the local welding supply and buy a welders leg shield, cut the shoe top off of it and proceed to have fun. Been using one for years.
NRA Patron member
NRA Endowment Member
NRA Life Member
IHMSA life member
NBRSA member
IHMSA VP (past)
IHMSA President (past)
32 degree Scottish Rite
3rd. deg. Master Mason
Top
United States of America
IHMSA15151
Class C
Posts: 153
Joined: Tue Mar 01, 2011 12:30 am
IHMSA Member#: 15151
Location: Cody, Wyoming

Re: Blast shield needed

Post by IHMSA15151 »

I have one. I need to dig through my stuff and find it. Haven't shot revolver in years. If you'll cover shipping I"ll send it to you.
Top
wheelgun7360

Re: Blast shield needed

Post by wheelgun7360 »

IHMSA15151 wrote:I have one. I need to dig through my stuff and find it. Haven't shot revolver in years. If you'll cover shipping I"ll send it to you.
If Mike does not want it I will take it. Thanks Allen
Top
United States of America
WA_SHTR+44M
Class C
Posts: 168
Joined: Sat Jan 26, 2013 7:37 pm
IHMSA Member#: 7771

Re: Blast shield needed

Post by WA_SHTR+44M »

What I was able to find is that you can find a local leather shop or Saddle shop and ask them for a piece of Split Pearl and they should be able to offer you about 3 different thickness grades. Split Pearl is the gray tanned leather from the hide that is usually what the welders gloves, aprons and Ferrier aprons are made of. My local saddle shop has made my blast shield and cut it to my specific application and sewn the strap to it as I requested. I have had my blast shield since 1996.

Steve 7771
IHMSA Member since 1996
B-) 1st Copy IHMSA Newsletter Flash Drive 40 Years 1977-2016
Top
User avatar United States of America
Rodent
Class B
Posts: 303
Joined: Sat Feb 05, 2011 9:03 am
IHMSA Member#: 27115
Location: Madison, Virginia

Re: Blast shield needed

Post by Rodent »

WA_SHTR+44M wrote:What I was able to find is that you can find a local leather shop or Saddle shop and ask them for a piece of Split Pearl and they should be able to offer you about 3 different thickness grades. Split Pearl is the gray tanned leather from the hide that is usually what the welders gloves, aprons and Ferrier aprons are made of. My local saddle shop has made my blast shield and cut it to my specific application and sewn the strap to it as I requested. I have had my blast shield since 1996.

Steve 7771
That is like the one that I had, but was ignorant enough to let it go. :)


Mike
Co-Match Director - Piedmont Sportsman Club in Gordonsville Virginia
Top
User avatar United States of America
Rodent
Class B
Posts: 303
Joined: Sat Feb 05, 2011 9:03 am
IHMSA Member#: 27115
Location: Madison, Virginia

Re: Blast shield needed

Post by Rodent »

IHMSA15151 wrote:I have one. I need to dig through my stuff and find it. Haven't shot revolver in years. If you'll cover shipping I"ll send it to you.

Thanks. Sent you a return PM.


Mike
Co-Match Director - Piedmont Sportsman Club in Gordonsville Virginia
Top
Post Reply

Return to “Classifieds”