Page 1 of 1
.300 ACC Blackout for field pistol
Posted: Sun Jul 21, 2019 8:43 pm
by Jimologist
The above cartridge will not be allowed to be shot in Field Pistol at Pickaway County Sportsmen Club which is located near Circleville, Oh.
Our match dates are posted in the master schedule along with my contact information.
In addition as always any other cartridges that produce any target damage will be disqualified.
Jim Kesser
Re: .300 ACC Blackout for field pistol
Posted: Sun Jul 21, 2019 11:10 pm
by contender1121
Out of curiosity, would you consider allowing it if it was stipulated that it must be loaded for sub-sonic velocity?
Re: .300 ACC Blackout for field pistol
Posted: Mon Jul 22, 2019 8:30 am
by Jimologist
No
Jim Kesser
Re: .300 ACC Blackout for field pistol
Posted: Mon Jul 22, 2019 4:57 pm
by braud357
Jim, we have decided not to allow it at our matches in Louisiana either !
Re: .300 ACC Blackout for field pistol
Posted: Mon Jul 22, 2019 5:53 pm
by JACKIE40X40
300 Blackout will not be allowed in PH or FP short.
Re: .300 ACC Blackout for field pistol
Posted: Mon Jul 22, 2019 6:34 pm
by contender1121
JACKIE40X40 wrote:300 Blackout will not be allowed in PH or FP,at OKCGC.
Would I be correct that you are referring to PH short course? PH Long is shot on BB targets.
Re: .300 ACC Blackout for field pistol
Posted: Mon Jul 22, 2019 6:57 pm
by 260 Striker
I'm surprised someone hasn't chimed in by now (so I will) about allowing 300 Whisper and/or 300/221 Rimmed. You know how rule Nazis are, if you don't mention all three cartridges someone will suspect the unmentioned one or ones are allowed. I'm sure that will be three NOs from Jim.
Re: .300 ACC Blackout for field pistol
Posted: Mon Jul 22, 2019 7:46 pm
by JACKIE40X40
contender1121 wrote:JACKIE40X40 wrote:300 Blackout will not be allowed in PH or FP,at OKCGC.
Would I be correct that you are referring to PH short course? PH Long is shot on BB targets.
Yes sir it is allow on full size.
Re: .300 ACC Blackout for field pistol
Posted: Tue Jul 23, 2019 10:04 am
by Jimologist
For this ban, I consider .300 whisper, .300 ACC Blackout, .300-.221, and the .300-.221 rimmed to all be the same.
In fact I have a reamer from PTG that is marked with both designations. Rimmed is different of course.
None are appropriate for FP. And of course that goes for PH short.
Jim