300 Blackout CB Loads

Post Reply
ch-pi-tu-ra
Target Setter
Posts: 3
Joined: Tue Mar 15, 2016 5:26 pm
IHMSA Member#: 57721
Location: Marysville, Ohio

300 Blackout CB Loads

Post by ch-pi-tu-ra »

My first thread on this forum. :)
I recently purchased a custom 300 Blackout barrel from MGM and have been having a difficult time getting a jacketed bullet to group less than 2.5" @ 100 yards.
I have tried about 8 different bullets and 8 different powders with about 8 different loads per bullet.
That's about 512 combinations.
So now I would like to add to that mass of variables by using a good cast bullet and appropriate powder load.
Anybody have any suggestions?

My 357 Remington MAXimum shoots consistent 1" groups at 200 yards using 180 grain Cast Performance products with 19.0 grains of IMR 4227.
I would like to attain this same or similar performance.
NRA Life Member, Vietnam Veteran, 3D CAD Specialist using Inventor, and Creo Parametric.
Vietnam
BADDOG-0302
Spotter
Posts: 55
Joined: Mon Dec 15, 2014 7:58 pm
IHMSA Member#: 566

Re: 300 Blackout CB Loads

Post by BADDOG-0302 »

Are you talking about casting your own, or buying them already cast ?
Here is a list of company's selling cast bullets

http://www.go2gbo.com/forums/cast-bulle ... e-review)/
MSLiechty
Target Setter
Posts: 19
Joined: Fri Jan 09, 2015 1:41 pm
IHMSA Member#: 51574

Re: 300 Blackout CB Loads

Post by MSLiechty »

im shooting .300 BLK in informal silhouette matches. Im running 14.5 graiuns N110 with 110 V max and Sierra 125 SP. It takes the rams.

ML
Post Reply