CFE 223

Questions on all things reloading
Post Reply
User avatar
RockinHRacin
Spotter
Posts: 76
Joined: Sun Feb 06, 2011 3:07 pm
IHMSA Member#: 55010

CFE 223

Post by RockinHRacin »

Anybody using this new Hodgdon Powder yet? I'm considering using it in my .243 but they don't have loads yet for my bullet weight. Any suggestions?


Chris
God created Electronic Warfare Maintenance Technicians so pilots would have heroes too.
United States of America
Richard Pickering
Class B
Posts: 304
Joined: Sun Feb 06, 2011 10:56 am
IHMSA Member#: 5905
Location: Stone Mountain, Ga

Re: CFE 223

Post by Richard Pickering »

Chris, have you contacted Hodgdon by calling or via email ? They may be able to offer help. Or: Call Sierra Bullets and see if they can offer anything. A third avenue: Wolfe Publishing--Handloader Mag. in Arizona. Richard
I have served as assistant match director, Southern Silhouette club, 1980s. Also, the Griffin Gun Club for Silhouette during the 1990s, to about 2005. For a short period I authored the ''Cast Bullet'' section of The IHMSA News. Joined IHMSA March 1979.
User avatar
RockinHRacin
Spotter
Posts: 76
Joined: Sun Feb 06, 2011 3:07 pm
IHMSA Member#: 55010

Re: CFE 223

Post by RockinHRacin »

Thx Richard
God created Electronic Warfare Maintenance Technicians so pilots would have heroes too.
sgtrock965
Target Setter
Posts: 12
Joined: Fri Dec 30, 2011 9:20 pm
IHMSA Member#: 0

Re: CFE 223

Post by sgtrock965 »

Handloader Magazine #278 (June 2012) has a very good article (page 22), and recommended loads for this powder in .243 and 6 other calibers.

According to the author, he wrote "In the .243 Winchester, Hodgdon's data pairs CFE 223 only with light varmit weight bullets from 55 to 75 grains. I selected a Barnes 58-grain Varminiter that astonishingly clocked over 3900 fps - 66 fps over expectations - from my notoriusly worn barrel. Accuracy was still perfectly acceptable." His writing verbatim. The accomanying chart listed the 58gr bullet over 44.9 gr @ 3951 fps. As always becareful and start with a lower dose.

Hope this helps.
User avatar
RockinHRacin
Spotter
Posts: 76
Joined: Sun Feb 06, 2011 3:07 pm
IHMSA Member#: 55010

Re: CFE 223

Post by RockinHRacin »

I am using CFE 223 in my .243 with heavier bullets (95 grain) now. I'm flattening primers now so I'm still developing the load, but I'm quite happy with the change. (Because I'm still running hot, I won't release the load data...but my Striker loves it.)

Chris
God created Electronic Warfare Maintenance Technicians so pilots would have heroes too.
Post Reply