7br loads for xp-100 in BB

[rr1220]

i am buying a xp-100 in 7br this weekend for use in U bb and am looking @different loads along with the loads used by the seller

[rr1220]

what is the data on case length, primers and oal for the154 hornady h-335

[35isit]

Also try 19-20 grains IMR SR4759 with any 140-154 grain bullet. I use Federal 205M primers. I'm sure any benchrest primer would work. Your COAL will depend on how your chamber was cut.

[wheelgun7360]

my load for the 7br is 25 grains of hodgdon-322 with a 150 grain bullet. had shot this load for years with great results. allen

[T1Kilr]

Also try 19-20 grains IMR SR4759 with any 140-154 grain bullet. I use Federal 205M primers. I'm sure any benchrest primer would work. Your COAL will depend on how your chamber was cut.

Thats about as good of a load as you will find.

[T1Kilr]

Just about anything will shoot great in a 7BR, Try all of the following with a 154 gr Hornady bullet, 29.0gr H335, 27.0gr H4895, 26.0gr AA2015. You can also use these with 140gr bullets as well as 162 gr bullets, all mild accurate loads.

this is about as accurate of a load that you will find.

[Win1917]

I haven't shot a 7BR too much but AA2015 and IMR 8208 both seemed to shoot well. I just ordered some H-322 to try.

[rr1220]

well for now i am using rl-7 @ 24.5gr with 150gr gamekings and rem 7 1/2 primers es of 24 and sd of 9,i will shoot my first match with new xp and load in ohio next weekend thanks for all the info

[wheelgun7360]

well for now i am using rl-7 @ 24.5gr with 150gr gamekings and rem 7 1/2 primers es of 24 and sd of 9,i will shoot my first match with new xp and load in ohio next weekend thanks for all the info

if your getting an es of 24 and an sd of 9 with you current load i would leave it alone if your velocity is what you want. allen

[rr1220]

velocity is 2030 fps, now it is up to me to do my part behind the sights