Page 1 of 1
35 Remington and IMR4320
Posted: Wed Nov 09, 2016 7:47 am
by borregos
Does anybody have any experience with using IMR 4320 and cast bullets in the 35 Remington?
Re: 35 Remington and IMR4320
Posted: Fri Nov 25, 2016 10:05 pm
by jcunclejoe
Never tried 4320 but I have had good results with 36gr of 4895 and a 200gr RCBS cast bullet in my Marlin.
You might try to find a Guns and Ammo article from 2005 (sorry I don't know the month) there is a good article on the 35 Rem by Chub Eastman. May be some cast data in it, I don't remember for sure.
There could also be some great 35 rem info on Castboolits and MarlinOwners websites.
If you email me the bullet you are thinking of I can check on a range of charge weights of 4320 for you.
Good luck.
Joe
Re: 35 Remington and IMR4320
Posted: Sat Nov 26, 2016 3:17 pm
by borregos
Thanks Joe, sent you a PM.
Re: 35 Remington and IMR4320
Posted: Mon Nov 28, 2016 1:07 pm
by nutcase
I could only find one load for that combo.
The RCBS Cast bullet manual lists the following:
Rcbs 200 GR FN cast bullet. Shows charge of 35-37 Grs of IMR4320.
Re: 35 Remington and IMR4320
Posted: Tue Nov 29, 2016 6:47 am
by borregos
nutcase wrote:I could only find one load for that combo.
The RCBS Cast bullet manual lists the following:
Rcbs 200 GR FN cast bullet. Shows charge of 35-37 Grs of IMR4320.
Many thanks Dan.