Small Bore P and PAS

kruzer · Post by **kruzer** » Fri Aug 05, 2011 10:41 pm

Thinking about a Ruger Mark III Hunter and a Browning Buckmark Hunter, one for P and one for PAS.
Which for which? Iron for one and scope for the other??
Opinions please. Thanks Kruzer

RockinHRacin · Post by **RockinHRacin** » Sat Aug 06, 2011 5:53 am

I'd figure out which one I shoot iron sights with better and leave that one P. Put the scope on the other one.

Chris

P.S. I really didn't mean to make that sound as smart mouthed as I'm reading it back to myself... LOL

Post by **19 Turkeys** » Sat Aug 06, 2011 9:35 am

Why not one Contender frame and two barrels? That would be far more accurate!

Steve W.

wheelgun7360 · Post by **wheelgun7360** » Sat Aug 06, 2011 10:25 am

what steve said X2. allen

high standard 40 · Post by **high standard 40** » Sat Aug 06, 2011 11:38 am

I agree with Steve and Allen. The Ruger and Browning would not be able to deliver as good of groups as a Contender.

kruzer · Post by **kruzer** » Sat Aug 06, 2011 2:47 pm

A couple of TC's is not out of the question, but I like the Ruger and the Browning. Can't they be good for something?

RockinHRacin · Post by **RockinHRacin** » Sat Aug 06, 2011 7:04 pm

But if Kruzer already owns the Buckmark and the Mark III, the Contender looks awful expensive...I mean if we are "what if"ing it, why not get two MOAs?

Chris

Rodent · Post by **Rodent** » Sat Aug 06, 2011 9:11 pm

If you can find a Buckmark Silhouette model, you can shoot just as good as any T/C . As a matter of fact, I gave up my T/C for the Buckmark. Do not let anyone convince you of anything different. If you want to go that route, then do it, by all means.

Mike

high standard 40 · Post by **high standard 40** » Sat Aug 06, 2011 9:41 pm

Rodent wrote:If you can find a Buckmark Silhouette model, you can shoot just as good as any T/C . As a matter of fact, I gave up my T/C for the Buckmark. Do not let anyone convince you of anything different. If you want to go that route, then do it, by all means.

Mike

Mike, I'm gonna have to be the one to tell him different about a Buckmark Silhbouette. I had one of those and it wouldn't shoot worth beans. I know there are some that do shoot well but it is obviously possible to get a bad one. Mine would group no better than 5" at 100 yards with a 14X scope from sandbags.....and I tried every brand of 22 ammo I could find in it. I had a friend who had another one and it shot a little better than mine but not much. If yours shoots good I'm proud for you. I sold mine fast and moved on to a Contender.

I interpreted the original post to mean he was considering buying those guns he mentioned to use. In which case I would suggest the Contender instead. If he already has those guns, my advice would be the same as previously given. The most accurate with irons should stay that way and scope the other.

Rodent · Post by **Rodent** » Sun Aug 07, 2011 1:35 pm

Mike, I'm gonna have to be the one to tell him different about a Buckmark Silhbouette.

Kinda figured that you would.

Small Bore P and PAS

Small Bore P and PAS

Re: Small Bore P and PAS

Re: Small Bore P and PAS

Re: Small Bore P and PAS

Re: Small Bore P and PAS

Re: Small Bore P and PAS

Re: Small Bore P and PAS

Re: Small Bore P and PAS

Re: Small Bore P and PAS

Re: Small Bore P and PAS