I seem to remember that at one time there was a tool made to load .22 LR cartridges into the MOA pistol.
Does anyone know of a source?
Did it work?
Thanks.
MOA .22 LR Loading Tool
-
- Target Setter
- Posts: 5
- Joined: Mon Apr 18, 2011 7:53 pm
- IHMSA Member#: 36117
- 35isit
- State Director
- Posts: 802
- Joined: Fri Feb 04, 2011 9:36 am
- IHMSA Member#: 36827
- Location: Central Ky
- Contact:
Re: MOA .22 LR Loading Tool
If you can't find a MOA loading tool. There used to be a shooter from Maryland that used toy clothes pins. You may try those.
Greg
Life Member of N.R.A.
80X80 7/27/2010
Ky State Director
Life Member of N.R.A.
80X80 7/27/2010
Ky State Director
- braud357
- Class A
- Posts: 652
- Joined: Sun Feb 06, 2011 7:56 am
- IHMSA Member#: 13794
- Location: Gonzales, LA
Re: MOA .22 LR Loading Tool
When I had my MOA 22, I had the factory loading tool. I found that it did not work all that well. What I did was make some using wooden dowel rod, with clear plastic tubing slipped over it. I used some wooden drawer knobs on the end, and made the around 7 - 8 inches long. With the tubing slipped a bit past the end of the dowel rod, I would slip a 22 round in , and when inserting it into the chamber, the dowel rod would push the round into the chamber- They worked like a charm !!
IHMSA # 13794 Joined May, 1980
Match Director Ascension Silhouette Gonzales, LA 1991-2009
Louisiana IHMSA Deputy State Director 1983 - 1985
Louisiana IHMSA State Director 1995 - 2007, 2014 -
IHMSA Region 2 Director 2007 - 2009
Life Member - NRA
Match Director Ascension Silhouette Gonzales, LA 1991-2009
Louisiana IHMSA Deputy State Director 1983 - 1985
Louisiana IHMSA State Director 1995 - 2007, 2014 -
IHMSA Region 2 Director 2007 - 2009
Life Member - NRA
-
- Target Setter
- Posts: 5
- Joined: Mon Apr 18, 2011 7:53 pm
- IHMSA Member#: 36117
Re: MOA .22 LR Loading Tool
Thanks for the info.
The DIY version sounds easy enough.
Mike
The DIY version sounds easy enough.
Mike