Bullet weight for CPT

Post Reply
User avatar United States of America
SteveJewels
Spotter
Posts: 60
Joined: Thu Aug 17, 2023 5:23 am
IHMSA Member#: 57964
Location: Dayton, OH

Bullet weight for CPT

Post by SteveJewels »

When shooting a 22 Hornet for Field Pistol for CPT (not Rams), what is the optimum bullet weight?

40? 45? 50? Heavier? Lighter?

Why is your choice the best? What are the plusses and minuses?
IHMSA 57964L

Image
User avatar United States of America
19 Turkeys
Class AA
Posts: 1095
Joined: Fri Feb 04, 2011 12:14 am
IHMSA Member#: 33287
Location: S Arizona
Contact:

Re: Bullet weight for CPT

Post by 19 Turkeys »

My solution was to sell the Hornet barrels and switch to the 25-20. One bullet, one load & no rung rams. 5.5 grains of VV 340, Hornady 87 grain bullet, 7 1/2 primers. 1387 FPS.

Steve W.
Past Match Director, JCSA - Grants Pass, OR
Past JCSA Board Member
IHMSA Life Member
Past Editor IHMSA News
Past Manager of IHMSA HQ West
NRA Patron

Due to recent cutbacks the light at the end of the tunnel has been turned off.
User avatar United States of America
high standard 40
Class A
Posts: 657
Joined: Mon Feb 07, 2011 8:08 am
IHMSA Member#: 11568

Re: Bullet weight for CPT

Post by high standard 40 »

SteveJewels wrote: Tue Dec 05, 2023 8:22 am When shooting a 22 Hornet for Field Pistol for CPT (not Rams), what is the optimum bullet weight?

40? 45? 50? Heavier? Lighter?

Why is your choice the best? What are the plusses and minuses?
I have always used 55 gr Hornady SP on all four targets and sometimes RCBS 55 gr cast. I can't remember ever ringing any target that I put a full bullet on.
IHMSA Member since 1980
Former Match Director Baton Rouge Silhouette Club
Current Match Director Ascension Silhouette
Current Match Director Saline Creek Silhouette
Current Match Director Top Shot Silhouette
NRA Life Member
NRA Range Safety Officer
User avatar United States of America
SteveJewels
Spotter
Posts: 60
Joined: Thu Aug 17, 2023 5:23 am
IHMSA Member#: 57964
Location: Dayton, OH

Re: Bullet weight for CPT

Post by SteveJewels »

19 Turkeys wrote: Tue Dec 05, 2023 10:40 am My solution was to sell the Hornet barrels and switch to the 25-20. One bullet, one load & no rung rams.

Steve W.
What weight bullet?
IHMSA 57964L

Image
User avatar United States of America
19 Turkeys
Class AA
Posts: 1095
Joined: Fri Feb 04, 2011 12:14 am
IHMSA Member#: 33287
Location: S Arizona
Contact:

Re: Bullet weight for CPT

Post by 19 Turkeys »

5.5 grains of VV 340, Hornady 87 grain bullet, 7 1/2 primers. 1387 FPS.

Steve W.
Past Match Director, JCSA - Grants Pass, OR
Past JCSA Board Member
IHMSA Life Member
Past Editor IHMSA News
Past Manager of IHMSA HQ West
NRA Patron

Due to recent cutbacks the light at the end of the tunnel has been turned off.
United States of America
braud357
Class A
Posts: 652
Joined: Sun Feb 06, 2011 7:56 am
IHMSA Member#: 13794
Location: Gonzales, LA

Re: Bullet weight for CPT

Post by braud357 »

Ditto on what Charlie said - I use the Hornady 55 grain SP, with a moderate load using Accurate #9. Used this load in both of my TC FP guns, and in a MGM 14" Hornet barrel for Practical Hunter. I have NEVER lost a solidly hit target with any of my guns using this load. I also shot my 14" barrel once at a Big Bore match in UASHS - fired a 39x40 with it (missed ram #1)
IHMSA # 13794 Joined May, 1980
Match Director Ascension Silhouette Gonzales, LA 1991-2009
Louisiana IHMSA Deputy State Director 1983 - 1985
Louisiana IHMSA State Director 1995 - 2007, 2014 -
IHMSA Region 2 Director 2007 - 2009
Life Member - NRA
Post Reply