327 Federal / .32 H&R Magnum

MarcusTas
Target Setter
Posts: 5
Joined: Mon May 02, 2016 9:20 pm
IHMSA Member#: 0

Re: 327 Federal / .32 H&R Magnum

Post by MarcusTas »

StandingTall wrote:Marcus,

What cast bullets are you using and do you mind "sharing the load"?

Lyman 311008DV
4grn 231
Canada
Bad Eyes
Target Setter
Posts: 21
Joined: Tue May 22, 2018 10:06 pm
IHMSA Member#: 0

Re: 327 Federal / .32 H&R Magnum

Post by Bad Eyes »

Hello:

Bullberry barrels chambered in 32 H&R Mag. and 327 Federal are .308" not .312". Would this still meet the rules for Field Pistol's straight wall requirement?

Also, what’s the allowed barrel diameter on replacement barrels?

The IHMSA rule book states, “A barrel outside diameter that does not exceed that found at the breech end of a standard Thompson Center Arms barrel as fitted to the model in question.”

But I’m not sure what number that translates into, i.e. 1”, .85”, .75”, etc.

Thanks
Post Reply