Gun for Field Pistol
- aggshooter
- IHMSA VP
- Posts: 467
- Joined: Sun Mar 01, 2015 7:53 pm
- IHMSA Member#: 29087
- Location: Terre Haute, Indiana
Re: Gun for Field Pistol
You have some really good trigger smiths in Ohio. I won't put their names on the forum, but contact the match directors at LHA, Circleville, and Tucso for references.
Rich Hawkins
#29087
IHMSA VP
"Go ahead and shoot. The bullet has to go somewhere."
George Hawkins 1917-2000
#29087
IHMSA VP
"Go ahead and shoot. The bullet has to go somewhere."
George Hawkins 1917-2000
- SteveJewels
- Spotter
- Posts: 60
- Joined: Thu Aug 17, 2023 5:23 am
- IHMSA Member#: 57964
- Location: Dayton, OH
Re: Gun for Field Pistol
I found the post I was referring to;
https://forum.accurateshooter.com/threa ... p.4104499/
The reference to "past 100" leads me to believe he may be talking about something other than FP.
Here is the original post on Accurate Shooter.SteveJewels wrote: ↑Fri Oct 06, 2023 10:11 am
"Steve, the Hornet even with 60’s could cause one frustration with hand set target. You guys with auto resets and a topple point set up have it made. Coming west of the Mississippi may cause some shooters grief.
Recall some years back a conversation with Gary R, telling me how his 221FB was taking over BB rams with proper placement, ain’t gonna happen on any kind of a regular basis her, lol.
To the OP, a lot of work for what you get in return. I doubt brass or primer pockets will stand pressures to get decent results past 100 with the heavies, even for paper punching."
https://forum.accurateshooter.com/threa ... p.4104499/
The reference to "past 100" leads me to believe he may be talking about something other than FP.
IHMSA 57964L
![Image](https://media.giphy.com/media/v1.Y2lkPTc5MGI3NjExZ2Z2dmhwdTczeDRkM21iNTgybzI5N2FmbnBnZGg2d3VxM2syam13ciZlcD12MV9pbnRlcm5hbF9naWZfYnlfaWQmY3Q9Zw/cz20XawUUeEmJeax5B/giphy.gif)
![Image](https://media.giphy.com/media/v1.Y2lkPTc5MGI3NjExZ2Z2dmhwdTczeDRkM21iNTgybzI5N2FmbnBnZGg2d3VxM2syam13ciZlcD12MV9pbnRlcm5hbF9naWZfYnlfaWQmY3Q9Zw/cz20XawUUeEmJeax5B/giphy.gif)
- SteveJewels
- Spotter
- Posts: 60
- Joined: Thu Aug 17, 2023 5:23 am
- IHMSA Member#: 57964
- Location: Dayton, OH
Re: Gun for Field Pistol
SSK-50 is on order. EABCO is saying 6 to 8 weeks. We'll see. If that happens it will be in time for spring.
MGM barrel on order too. 22 Hornet, 9 twist. They are also quoting 6 to 8 weeks.
I found sufficient brass and a scope and have some bullets to try.
Found a set of Redding Competition dies. Hopefully the seater will be kind to the brass.
I think I have a line on some H4895. A local guy offered to trade it to me for some Varget.
MGM barrel on order too. 22 Hornet, 9 twist. They are also quoting 6 to 8 weeks.
I found sufficient brass and a scope and have some bullets to try.
Found a set of Redding Competition dies. Hopefully the seater will be kind to the brass.
I think I have a line on some H4895. A local guy offered to trade it to me for some Varget.
Last edited by SteveJewels on Mon Dec 11, 2023 6:05 am, edited 1 time in total.
IHMSA 57964L
![Image](https://media.giphy.com/media/v1.Y2lkPTc5MGI3NjExZ2Z2dmhwdTczeDRkM21iNTgybzI5N2FmbnBnZGg2d3VxM2syam13ciZlcD12MV9pbnRlcm5hbF9naWZfYnlfaWQmY3Q9Zw/cz20XawUUeEmJeax5B/giphy.gif)
![Image](https://media.giphy.com/media/v1.Y2lkPTc5MGI3NjExZ2Z2dmhwdTczeDRkM21iNTgybzI5N2FmbnBnZGg2d3VxM2syam13ciZlcD12MV9pbnRlcm5hbF9naWZfYnlfaWQmY3Q9Zw/cz20XawUUeEmJeax5B/giphy.gif)
Re: Gun for Field Pistol
Go with the 22 Hornet... preferably 1-9" twist and you'll be fine with 55gr or heavier bullets.
- Shoot2Thrill
- IHMSA President
- Posts: 202
- Joined: Tue May 27, 2014 8:10 pm
- IHMSA Member#: 57686
- Location: Mercer, PA
- Contact:
Re: Gun for Field Pistol
A boat tail bullet will be kind to the brass.SteveJewels wrote: ↑Sat Dec 09, 2023 8:04 am SSK-50 is on order. EABCO is saying 6 to 8 weeks. We'll see. If that happens it will be in time for spring.
MGM barrel on order too. 22 Hornet, 9 twist. They are also quoting 6 to 8 weeks.
I found sufficient brass and a scope and have some bullets to try.
Found a set of Redding Cometition dies. Hopefully the seater will be kind to the brass.
I think I have a line on some H4895. A local guy offered to trade it to me for some Varget.
Doug Edney, IHMSA President
57686
NRA Life Member
IHMSA Member in good "standing"
Western Reserve Fish & Game Protective Association, PA Silhouette Co-Match Director
57686
NRA Life Member
![US Flag **==](./images/smilies/55.gif)
IHMSA Member in good "standing"
Western Reserve Fish & Game Protective Association, PA Silhouette Co-Match Director
- SteveJewels
- Spotter
- Posts: 60
- Joined: Thu Aug 17, 2023 5:23 am
- IHMSA Member#: 57964
- Location: Dayton, OH
Re: Gun for Field Pistol
Thank you Doug. I have been eyeballing some BT's just in case.
I remember from when I shot Pistol Silhouette before was how finicky the brass was.
I have an annealer. Don't know if that will make things better or worse. LOL
The Redding Competition seater has a sliding sleeve and captures the case and bullet. The bullet section of the sleeve has a cylinder barely larger than the bullet so it does a pretty good job of aligning it to the case. I'm hoping that and a slight chamfer will work.
If not, I will find some boattails.
![Image](https://redding-reloading.com/images/stories/media/compseaterd300h.jpg)
I remember from when I shot Pistol Silhouette before was how finicky the brass was.
![Sad :(](./images/smilies/2.gif)
I have an annealer. Don't know if that will make things better or worse. LOL
The Redding Competition seater has a sliding sleeve and captures the case and bullet. The bullet section of the sleeve has a cylinder barely larger than the bullet so it does a pretty good job of aligning it to the case. I'm hoping that and a slight chamfer will work.
If not, I will find some boattails.
![Image](https://redding-reloading.com/images/stories/media/compseaterd300h.jpg)
IHMSA 57964L
![Image](https://media.giphy.com/media/v1.Y2lkPTc5MGI3NjExZ2Z2dmhwdTczeDRkM21iNTgybzI5N2FmbnBnZGg2d3VxM2syam13ciZlcD12MV9pbnRlcm5hbF9naWZfYnlfaWQmY3Q9Zw/cz20XawUUeEmJeax5B/giphy.gif)
![Image](https://media.giphy.com/media/v1.Y2lkPTc5MGI3NjExZ2Z2dmhwdTczeDRkM21iNTgybzI5N2FmbnBnZGg2d3VxM2syam13ciZlcD12MV9pbnRlcm5hbF9naWZfYnlfaWQmY3Q9Zw/cz20XawUUeEmJeax5B/giphy.gif)
- SteveJewels
- Spotter
- Posts: 60
- Joined: Thu Aug 17, 2023 5:23 am
- IHMSA Member#: 57964
- Location: Dayton, OH
Re: Gun for Field Pistol
I received an email from EABCO.
"Our first shipment (orders placed on or before 12/03/23) is scheduled to deliver to us mid-February,"
I found an MGM barrel, 22 Hornet, 9 twist.
I think all I need yet is a grip and forearm and scope rings.
"Our first shipment (orders placed on or before 12/03/23) is scheduled to deliver to us mid-February,"
I found an MGM barrel, 22 Hornet, 9 twist.
I think all I need yet is a grip and forearm and scope rings.
IHMSA 57964L
![Image](https://media.giphy.com/media/v1.Y2lkPTc5MGI3NjExZ2Z2dmhwdTczeDRkM21iNTgybzI5N2FmbnBnZGg2d3VxM2syam13ciZlcD12MV9pbnRlcm5hbF9naWZfYnlfaWQmY3Q9Zw/cz20XawUUeEmJeax5B/giphy.gif)
![Image](https://media.giphy.com/media/v1.Y2lkPTc5MGI3NjExZ2Z2dmhwdTczeDRkM21iNTgybzI5N2FmbnBnZGg2d3VxM2syam13ciZlcD12MV9pbnRlcm5hbF9naWZfYnlfaWQmY3Q9Zw/cz20XawUUeEmJeax5B/giphy.gif)