ISO 7 BR brass

[Ron284Win]

Got an xp-100 and need some brass if anyone has some to part with. Thanks

[wheelgun7360]

How many you looking for? Allen 601-624-2868

[Ron284Win]

PM sent

[Ron284Win]

Spoke with Allen. He is a really nice guy. He checked to see how much he had and doesn’t have enough to spare. So I’m still looking for 7 BR brass. Thanks

[MSLiechty]

I have rem 7 BR brass. Shoot me an email if you haven't found any.


ML

Michaelscottliechty@gmail.com

[Handgunhunter]

I have some also but it’s currently loaded. I can pull the bullets if you’re not within driving range. I’m in Conover,NC.

[ram1982]

I have a RCBS 7mm B R form die set which I bought in the early 1980's if you are interested. I can also include about 130 formed 7mm BR cases made from military 308. You can make 7mm br from various rifle cases with the .409 base but will require the large rifle primers. There is a die to push the shoulder down, another die to trim and a die to ream the case. Original instructions are included in kit. Military cases are a lot of work because you need to clean primer pockets and you will notice a lot of reaming of the neck. It was also recommended that loads be reduced by 10 percent. You cannot reload with these dies. If interested you can email me at ggs1999@aol.com