WTB 7mmBR Brass

NO COMMERCIAL VENDORS!
Post Reply
DW44VH
Target Setter
Posts: 13
Joined: Wed Oct 17, 2012 5:38 pm
IHMSA Member#: 0

WTB 7mmBR Brass

Post by DW44VH »

I recently purchased an XP-100 in 7mm BR and feel like I stole it, $400.00 Canadian, (sorry had to brag a little) I was wondering if anyone has any factory 7mm BR brass they would be interested in parting with.
Last edited by DW44VH on Mon Feb 08, 2016 12:17 pm, edited 1 time in total.
Top
Benjamn
Target Setter
Posts: 6
Joined: Sat Feb 14, 2015 10:59 am
IHMSA Member#: 0
Location: Camas, Washington

Re: WTB 7mmBR Brass

Post by Benjamn »

I bought 6BR. Commercially available and can be had from lapua. Necked it up, easy peasy.
Top
United States of America
i26963
Class A
Posts: 657
Joined: Sun Feb 06, 2011 6:22 am
IHMSA Member#: 26963

Re: WTB 7mmBR Brass

Post by i26963 »

http://forum.accurateshooter.com/thread ... d.3894594/

Melvin
Co-Match Director LRGC, Lincolnton, GA
Top
DW44VH
Target Setter
Posts: 13
Joined: Wed Oct 17, 2012 5:38 pm
IHMSA Member#: 0

Re: WTB 7mmBR Brass

Post by DW44VH »

10 minutes late to reply...story of my life LOL
Thanks Melvin
Top
United States of America
i26963
Class A
Posts: 657
Joined: Sun Feb 06, 2011 6:22 am
IHMSA Member#: 26963

Re: WTB 7mmBR Brass

Post by i26963 »

DW44VH wrote:10 minutes late to reply...story of my life LOL
Thanks Melvin
Darn! Sorry you missed out. I will be on the lookout for some
Melvin
Co-Match Director LRGC, Lincolnton, GA
Top
United States of America
260 Striker
Class AA
Posts: 1623
Joined: Thu Mar 24, 2011 7:41 pm
IHMSA Member#: 0
Location: DeGraff, OH

Re: WTB 7mmBR Brass

Post by 260 Striker »

Midway USA shows 100 Lapua 6BR in stock for $93.99. Pricey but at least available. Brownells has same Lapua for $94.99. Best deal on Lapua is otmtactical.com in stock for $80.79 per 100. Midsouth Shooters has some Norma brass in stock for $88.70 so looks like you are going to pay $80 to $94 per 100 no matter whether Lapua or Norma.
Lynn Shultz
IHMSA #15692 since 1980
Past Match Director Logan Handgun Association
Current VP Logan Handgun Association
NRA Member
United States Air Force Veteran
Retired USAF Civil Servant (47 years)
937-407-4885
Top
DW44VH
Target Setter
Posts: 13
Joined: Wed Oct 17, 2012 5:38 pm
IHMSA Member#: 0

Re: WTB 7mmBR Brass

Post by DW44VH »

I use the Lapua 22-250 with good results. Probably a good way to go.
Top
User avatar United States of America
nutcase
Site Admin
Posts: 929
Joined: Sat Jul 09, 2011 4:44 pm
IHMSA Member#: 42084
Location: Yuma, AZ

Re: WTB 7mmBR Brass

Post by nutcase »

nobody knows when remington will start making brass again. So using Lapua 6BR is about your only option right now.
Daniel Hagerty
IHMSA # 42084L
IHMSA News Editor - 2015-2017
.22 records Coordinator - Present
CA State Director - 2015-2019
Match Director, Stockton Silhouette club 1990-1995
NRA Patriot Endowment Life Member
Top
Unsub
Target Setter
Posts: 22
Joined: Fri Jul 05, 2013 5:49 pm
IHMSA Member#: 0
Location: Brisbane QLD Australia.

Re: WTB 7mmBR Brass

Post by Unsub »

I necked out the 6 BR cases but found out the hard way that the flash hole is smaller in the 6BR and needs to be enlarged before necking.
Regards Peter.
Top
Unsub
Target Setter
Posts: 22
Joined: Fri Jul 05, 2013 5:49 pm
IHMSA Member#: 0
Location: Brisbane QLD Australia.

Re: WTB 7mmBR Brass

Post by Unsub »

No small pin available and needed brass straight away. Shopping for this sort of stuff is not that easy down under.
Regards Peter.
Top
Post Reply

Return to “Classifieds”