Is there a link to where I can get actual target sizes.
Under "resources" it shows a jpeg but no sizes.
I don't have autocad.
I seem to remember targets on a 1" grid pattern.
Thanks in advance.
Target Sizes
Target Sizes
Pete
Ontario Provincial Director
Match Director, Galt Sportsmen's Club
Ontario Provincial Director
Match Director, Galt Sportsmen's Club
- high standard 40
- Class A
- Posts: 657
- Joined: Mon Feb 07, 2011 8:08 am
- IHMSA Member#: 11568
Re: Target Sizes
I remember the 1" grid templates from many years ago but don't specifically remember the source. I have all of the targets of every scale drawn up in Photoshop and can provide the sizes for you......or the files in whatever image format you need.
IHMSA Member since 1980
Former Match Director Baton Rouge Silhouette Club
Current Match Director Ascension Silhouette
Current Match Director Saline Creek Silhouette
Current Match Director Top Shot Silhouette
NRA Life Member
NRA Range Safety Officer
Former Match Director Baton Rouge Silhouette Club
Current Match Director Ascension Silhouette
Current Match Director Saline Creek Silhouette
Current Match Director Top Shot Silhouette
NRA Life Member
NRA Range Safety Officer
- high standard 40
- Class A
- Posts: 657
- Joined: Mon Feb 07, 2011 8:08 am
- IHMSA Member#: 11568
Re: Target Sizes
I have always had issue with the target templates available on the IHMSA website referred to by Hosspower. The shape is all wrong when compared to what I have seen at matches all over this country, even at the Internationals. Look at this image to see what I am saying.
The chicken on the left is from the IHMSA website and the chicken on the right is what it should look like. The other 3 animals show similar anomalies.
.
The chicken on the left is from the IHMSA website and the chicken on the right is what it should look like. The other 3 animals show similar anomalies.
.
IHMSA Member since 1980
Former Match Director Baton Rouge Silhouette Club
Current Match Director Ascension Silhouette
Current Match Director Saline Creek Silhouette
Current Match Director Top Shot Silhouette
NRA Life Member
NRA Range Safety Officer
Former Match Director Baton Rouge Silhouette Club
Current Match Director Ascension Silhouette
Current Match Director Saline Creek Silhouette
Current Match Director Top Shot Silhouette
NRA Life Member
NRA Range Safety Officer
- ole95
- Class A
- Posts: 694
- Joined: Thu May 19, 2011 9:13 pm
- IHMSA Member#: 57528
- Location: Alabama
- Contact:
Re: Target Sizes
I can e-mail you printable scaled targets in pdf. Format
1/5 , SB, FP/ HS
1/5 , SB, FP/ HS
jrs
"ole78x80"
Life's easier when your only average
IHMSA #57528
Match director Backyard range 2013,2014
NRA
"ole78x80"
Life's easier when your only average
IHMSA #57528
Match director Backyard range 2013,2014
NRA
Re: Target Sizes
high standard 40,
Where did you get your target shapes from? I have been using the IHMSA page shapes to make pull rope reset targets.
If I'm using the wrong shape I would like to fix it before I start burning them out.
If anyone has DXF format files of the 'correct' shapes I could use them.
Thanks
Where did you get your target shapes from? I have been using the IHMSA page shapes to make pull rope reset targets.
If I'm using the wrong shape I would like to fix it before I start burning them out.
If anyone has DXF format files of the 'correct' shapes I could use them.
Thanks
- high standard 40
- Class A
- Posts: 657
- Joined: Mon Feb 07, 2011 8:08 am
- IHMSA Member#: 11568
Re: Target Sizes
I can't help with the CAD files. I got my templates from the original "One inch grid" templates referred to in the OP's post back in about 1980. The old IHMSA website had templates in JPEG and another format..... I think BMP. Anyway, the JPEG has always been like it is now but the other format showed a target like the one I have.Hosspower wrote:high standard 40,
Where did you get your target shapes from? I have been using the IHMSA page shapes to make pull rope reset targets.
If I'm using the wrong shape I would like to fix it before I start burning them out.
If anyone has DXF format files of the 'correct' shapes I could use them.
Thanks
IHMSA Member since 1980
Former Match Director Baton Rouge Silhouette Club
Current Match Director Ascension Silhouette
Current Match Director Saline Creek Silhouette
Current Match Director Top Shot Silhouette
NRA Life Member
NRA Range Safety Officer
Former Match Director Baton Rouge Silhouette Club
Current Match Director Ascension Silhouette
Current Match Director Saline Creek Silhouette
Current Match Director Top Shot Silhouette
NRA Life Member
NRA Range Safety Officer
- ole95
- Class A
- Posts: 694
- Joined: Thu May 19, 2011 9:13 pm
- IHMSA Member#: 57528
- Location: Alabama
- Contact:
Re: Target Sizes
Pm me your mailing address and I can you send you the cad dwg drawings
jrs
"ole78x80"
Life's easier when your only average
IHMSA #57528
Match director Backyard range 2013,2014
NRA
"ole78x80"
Life's easier when your only average
IHMSA #57528
Match director Backyard range 2013,2014
NRA
Re: Target Sizes
The CAD files from the link above seem to be correct.
I sent an email to Carl@IHMSA.org about this. Hopefully it is still a good address.
I have target shapes in PDF form that could be added to the targets page.
I sent an email to Carl@IHMSA.org about this. Hopefully it is still a good address.
I have target shapes in PDF form that could be added to the targets page.
- nutcase
- Site Admin
- Posts: 929
- Joined: Sat Jul 09, 2011 4:44 pm
- IHMSA Member#: 42084
- Location: Yuma, AZ
Re: Target Sizes
here is a copy of the originals issued in the Late 70's and 80's.
only problem I have with them is the pig and turkey were not straight when they were copied.
only problem I have with them is the pig and turkey were not straight when they were copied.
Daniel Hagerty
IHMSA # 42084L
IHMSA News Editor - 2015-2017
.22 records Coordinator - Present
CA State Director - 2015-2019
Match Director, Stockton Silhouette club 1990-1995
NRA Patriot Endowment Life Member
IHMSA # 42084L
IHMSA News Editor - 2015-2017
.22 records Coordinator - Present
CA State Director - 2015-2019
Match Director, Stockton Silhouette club 1990-1995
NRA Patriot Endowment Life Member