I purchased a used Ken Light Sight rib. Unfortunately, the rear notch is extremely narrow. Is there anyway to get a replacement rear sight blade with a wider notch?
7br aka Mark Barb
Ken Light sight rib
- nutcase
- Site Admin
- Posts: 947
- Joined: Sat Jul 09, 2011 4:44 pm
- IHMSA Member#: 42084
- Location: Yuma, AZ
Re: Ken Light sight rib
do you have the full length sight rib for a 10" barrel or the other?
Ken's sight ribs came with Bomar, champion or a kensight rear sight.Very old ones might have an ISGW. you have the following choices:
replace sight with a new sight. Kensight has one that should work. https://kensight.com/silhouette-sights-1/
Replace elevation section with a different one.
Or, just file the notch wider!
Ken's sight ribs came with Bomar, champion or a kensight rear sight.Very old ones might have an ISGW. you have the following choices:
replace sight with a new sight. Kensight has one that should work. https://kensight.com/silhouette-sights-1/
Replace elevation section with a different one.
Or, just file the notch wider!
Daniel Hagerty
IHMSA # 42084L
IHMSA News Editor - 2015-2017
.22 records Coordinator - Present
CA State Director - 2015-2019
Match Director, Stockton Silhouette club 1990-1995
NRA Patriot Endowment Life Member
IHMSA # 42084L
IHMSA News Editor - 2015-2017
.22 records Coordinator - Present
CA State Director - 2015-2019
Match Director, Stockton Silhouette club 1990-1995
NRA Patriot Endowment Life Member