will it make weight?

nutcase · Post by **nutcase** » Mon Oct 27, 2014 4:28 pm

the picture says it all

Now to find a gunsmith to fit it and install it!

260 Striker · Post by **260 Striker** » Mon Oct 27, 2014 7:39 pm

Might make weight but I'm guessing that you will be about 1/4" over the max allowed length for U-guns.

ole95 · Post by **ole95** » Mon Oct 27, 2014 7:59 pm

If the bore is 50 cal should be no problem weight
But like 260 the OAL may get you
But the guys in Ohio starting a new x
Class shoot what you brung they welcome fire beathing dragons

Hosspower · Post by **Hosspower** » Tue Oct 28, 2014 6:40 am

ole95 wrote:If the bore is 50 cal should be no problem weight
But like 260 the OAL may get you
But the guys in Ohio starting a new x
Class shoot what you brung they welcome fire beathing dragons

Forcast for Tusco this saturday is high of 42 with AM rain/snow showers. Yes, I will be welcoming any fire breathing dragons.

Sunday looks to be a balmy 49 degrees.

nutcase · Post by **nutcase** » Tue Oct 28, 2014 8:10 am

ok, time to be serious ;)

That is a 31" Krieger 6.5 Cal 1:8 twist barrel blank. when it is cut down to proper length, I should have enough left for a second barrel to use later.

I am still making up my mind if I want it contoured to a standard silhouette contour and have the Muzzle brake installed, OR go Bull Barrel and not use a muzzle brake.

It will be chambered either in 6.5BR or 6.5x47 Lapua. I shoot a lot of 500 Meter, so the extra horsepower of the 6.5x47 lapua is what I am Favoring.

Post by **19 Turkeys** » Tue Oct 28, 2014 9:43 am

nutcase wrote:ok, time to be serious ;)
I am still making up my mind if I want it contoured to a standard silhouette contour and have the Muzzle brake installed, OR go Bull Barrel and not use a muzzle brake.

Real men don't need no stinking brake!

Steve W.

ole95 · Post by **ole95** » Tue Oct 28, 2014 9:48 am

If your looking for opions here my $00.02
I have 2 striker "fun guns"
308 fac. Barrel with brake and 6.5x 284 heavy
Taper no brake. With full house loads and same weight bullets the heavy no brake
Has a lot less recoil and i like the heavy barrel
Better. Now this heavy would not make weight
But this barrel shoyld on a lighter xp

nutcase · Post by **nutcase** » Tue Oct 28, 2014 6:48 pm

19 Turkeys wrote:
nutcase wrote:ok, time to be serious ;)
I am still making up my mind if I want it contoured to a standard silhouette contour and have the Muzzle brake installed, OR go Bull Barrel and not use a muzzle brake.
Real men don't need no stinking brake!

Steve W.

I am leaning that way.. But you remember my XP 7-08 I shot on 1/2 size the first WCC? between me, Ted and Richard Mischler I think we broke at least 5 Targets

nutcase · Post by **nutcase** » Tue Oct 28, 2014 6:50 pm

ole95 wrote:If your looking for opions here my $00.02
I have 2 striker "fun guns"
308 fac. Barrel with brake and 6.5x 284 heavy
Taper no brake. With full house loads and same weight bullets the heavy no brake
Has a lot less recoil and i like the heavy barrel
Better. Now this heavy would not make weight
But this barrel shoyld on a lighter xp

I hope you don't shoot those in Prone!

will it make weight?

will it make weight?

Re: will it make weight?

Re: will it make weight?

Re: will it make weight?

Re: will it make weight?

Re: will it make weight?

Re: will it make weight?

Re: will it make weight?

Re: will it make weight?