Search found 53 matches
- Mon May 02, 2022 12:07 pm
- Forum: Region 7
- Topic: Silhouette in Southern Oregon
- Replies: 13
- Views: 16877
Re: Silhouette in Southern Oregon
Steve, thanks for the offer. I'm still in the early stages of seeing what is feasible to get going. I will be sure to let you know if something happens.
- Fri Apr 15, 2022 6:06 pm
- Forum: Region 7
- Topic: Silhouette in Southern Oregon
- Replies: 13
- Views: 16877
Re: Silhouette in Southern Oregon
We finally made to Grants Pass this year. Still settling in. It looks like the only silhouette left at JCSP is BPCR. Anyone still out here looking to rekindle anything else? Air, SB, BB pistol and/or rifle/lever gun?
- Thu Jan 16, 2020 5:42 pm
- Forum: Reloading
- Topic: Forming 7 TCU Brass
- Replies: 11
- Views: 6846
Re: Forming 7 TCU Brass
I did the 200 pcs of Lapua brass I had. It does require turning the neck a little after sizing to chamber but not that much trouble to do. I also did 100 pcs of Rem once fired brass. Neither had a problem with split necks so good to go.
- Thu Jan 09, 2020 2:48 pm
- Forum: Range Ramblings
- Topic: Contender Issues
- Replies: 3
- Views: 2115
Re: Contender Issues
I was thinking it may have something to do with the interlock. I will check the screw. I replaced most of the springs when I got the frame so I don't believe it is related to that. The light strikes are only happening with this barrel so it sounds like it might be the locking bolts. Thanks for the h...
- Thu Jan 09, 2020 11:55 am
- Forum: Range Ramblings
- Topic: Contender Issues
- Replies: 3
- Views: 2115
Contender Issues
I have an older G1 frame that has the easy open conversion. I have had the G1 frame about a year and it has worked perfectly up til now. A few weeks ago I started getting light primer strikes on the 22 LR barrel. Never an issue with my centerfire barrels. The firing pins on the 22 LR barrel looked o...
- Sat Dec 28, 2019 8:46 pm
- Forum: Cast Boolit
- Topic: Cast Load for 7mm Int Rimmed
- Replies: 1
- Views: 1860
Cast Load for 7mm Int Rimmed
Looking for cast load data. I currently have RCBS 145 & 168 Sil molds.
Re: 7 TCU
Thanks Lynn, that is about what I am getting with H322.
7 TCU
In a 7 TCU w/10" barrel, what velocity should I expect with 145 & 154 gn bullets?
- Thu Dec 19, 2019 12:02 am
- Forum: Big Bore
- Topic: Bullet construction
- Replies: 8
- Views: 4805
Re: Bullet construction
There are a lot of interesting posts over on the steelchickens forum from the late Dan Theodore, who spent a great deal of time testing and evaluating bullet construction and performance for the 500 meter rams. Well worth reading. Could you post a link? Melvin Here is one thread. Dan starts on page...
- Wed Dec 18, 2019 12:41 pm
- Forum: Big Bore
- Topic: Bullet construction
- Replies: 8
- Views: 4805
Re: Bullet construction
There are a lot of interesting posts over on the steelchickens forum from the late Dan Theodore, who spent a great deal of time testing and evaluating bullet construction and performance for the 500 meter rams. Well worth reading.